How to calculate the materials
Rows = round up((deck width in inches + gap) ÷ (actual board width + gap)). Stock boards per row = round up(deck run length ÷ stock board length). Multiply rows by boards per row, add waste and round up.
Worked example
A deck 12 ft long by 10 ft wide, with 5.5-inch-wide boards and a 1/8-inch gap, needs 22 rows. If boards are 12 ft long, that is 22 boards before waste; adding 10% gives 25 boards.
Before buying materials
This conservative estimate assumes boards run along the stated length and does not optimize offcut reuse. It excludes framing, fasteners, edge trim, stairs, diagonal patterns and structural requirements. Follow manufacturer installation guidance.
Prices are optional estimates for materials only. Labor, delivery, taxes and other supplies are not included.